ANCEL S300 – Car Smoke Leak Detector Turbo 12V Smoke Generator EVAP Pipe Leak Locator

ANCEL S-series Car EVAP Smoke Machine:

Are you experiencing any of the following problems: increased fuel consumption, faster-idling speed, water leaks, or difficulty locating the leaks?

ANCEL Model S300

Built-in air pump
Output pressure  0.8-14.5psi
Pressure gauge  ✔
Flow meter (flow regulation)  ✔
Flow regulation  ✔
Power indicator ✔
Work indicator  ✔
Working mode: Air / Smoke
Safety measures
anti spontaneous combustion  ✔
Safety measures:
prevent overheating  ✔
Circuit board ×

ANCEL S300 Main Selling Point:
1. Small size, patented technology, quality and after-sales support
2. Smoke is environmentally friendly and non-toxic, with a dual-mode design of air and smoke, achieving the required functions with one click
3. Simplify circuit board design
4. Built-in air source
5. Medium voltage output (Turbo)
6. Equipped with a pressure gauge
7. Equipped with flow meter
8. Rich accessories
9. Overheat & Anti-frost Protection

Support Multi-system Testing(Especially EVAP System)
EVAP System Test
Intake System Test
Exhaust Systems Test
Crankcase system test
Car Sealing Test
Fuel Tank System Test
Turbo System Test
Various Pipe Fittings Test

Wide Range of Applications
Free to choose Air/Smoke method to find leaks

Upgraded S300 Automotive Smoke Machine
Fits All Lines and Hoses

Ancel S300 Smoke Leak Detector Use Ways
Step1: Fill in 10ml-20ml test oil (baby oil, not including) to the detector
Step2: Disconnect the pipe that needs to be connected to the detector
Step3: Connect the detector with the DC12V battery, and the device starts to work
Step4: The pipe will be filled with smoke, check the leak points

Noted: The product does not come with Test Oil; you need to buy it locally. we suggest buying Johnson & Johnson Baby Oil’s pink label containing mineral ingredients.

How to judge leakage- through the pressure gauge?

NO Leak: When the value of the pressure gauge remains unchanged, and the flow meter reads zero (ball at the bottom of the scale), it means that there is no leakage in the system.

Small Leak: When the value of the pressure gauge drops and the ball in the flow meter slowly fall to the bottom of the scale, it indicates a small leak in the system.

Massive Leak: When the value of the pressure gauge reaches zero and the flow meter ball never falls to the bottom of the scale, it indicates a large leak in the system.

Caution
1. When you use this Ancel 300 Car Smoke Leak Detector for the first time, fill it with 10-20ml baby oil. Please be careful NOT to go beyond this range.
2. Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.
3 . Before filling with fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
4. During leak detection, please keep away from smoke-sensitive parts.
5. Do NOT run the detector over 8 minutes continuously. It needs interval rest.
6. The detector has an intelligent protector; if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.
7. The round part of this detector has the temperature. Please be careful to avoid burns.
8. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.