ANCEL VD500 – VAG VW AUDI SKODA OBD2 Automotive Scanner Full System Code Reader Airbag EPB Oil Reset OBD Car Diagnostic Tools
Ancel VD500 OBD2 Scanner
Designed to diagnose Volkswagen, Audi, Skoda, Seat V/A Series vehicles, 12V cars and light trucks (non-electric) from 1996 and newer that are OBD2 compliant with 16 Pin OBD2 protocols.
For Volkswagen (VAG) vehicles, the device can read and erase codes on various systems, including Engine, ABS, Transmission, SAS (not all cars), ESP, and TPMS. It can reset the oil, brake pad, and throttle position adaption.
For OBD2 vehicles, retrieve VIN information, read and erase codes, turn off MIL, and show definitions.
4. Vehicle coverage: for Volkswagen/VW (CC, EOS, Golf, GTI, Jetta, Passat, Phaeton, Polo, Rabbit, Sharan, Tiguan, Touran, Touareg); Audi(A3, A4, A6, A7, A8, A5, Q3, Q5, Q7, R8, RS3, TT, RS, RS5, S4, S6); Skoda (Octavia, Rapid, Yeti, Kodiaq, Fabio, Superb); Seat (leon, Ateca, Ibiza, Altea, Cushion, Cord, Alhambra).
This product is compatible with English, French, Spanish, and German languages.
The VD500 scanner provides lifetime free software updates.
All Systems Basic Functions:
Read Version information, Read fault codes, Erase fault codes, Data stream, Basic settings, Adaptation and Access Authorization
Ancel VD500 OBS2 Scanner Reading AllSystems
1. Engine System
It quickly determines the cause of the Engine System and turns off the warning light. It also retrieves the vehicle engine system’s current, permanent, and pending codes. Moreover, it shows critical OBD II standard extended data, such as fuel, emissions data, and other real-time manufacturer-specific parameters in the engine system, to ensure it works correctly and safely.
2.SRS(Airbag)
When the SRS (Safety Restraint System) light is on, the Airbag Control Unit sees an issue. Subsequently, the system is disabled, and the airbags will not deploy in the event of an accident. You can use VD500 to check if the SRS system is malfunctioning and get it fixed. Airbags must function properly at all times.
3. TPMS
If the TPMS (Tire Pressure Monitoring System) light is illuminated, your tires could be underinflated, leading to undue tire wear and possible tire failure. VD500 can read codes on the TPMS system to identify potential problems, including a bad sensor or underinflation, and clear them when a solution is found.
4. ABS
When you see the ABS (Anti-lock Brake System) light is on, you know it’s serious. VD500 can help. Use it to identify what has gone wrong by plugging the unit into your 16-pin port (normally under your steering wheel). You can decide what could be the causes of the error: low brake fluid, a blown fuse, or abnormal signals from wheel sensors.
5. Transmission System
If you notice the following: transmission slipping, rough shifts, delayed engagement, fluid leak or transmission warning, then your car may need to be maintained. You can use VD500 to do a series of diagnostics and pinpoint the problem area for repair.
6. SAS
The steering angle sensor (SAS) is a critical part of the ESC system that measures the steering wheel position angle and rate of turn. SAS is crucial for the safety of the driver and the passenger alike. When the SAS light is on, you can use VD500 to read error codes. Once a problem is fixed, you can use VD500 to recalibrate and clear the codes.
7. ESP System
Electronic Stability Program (also Electronic Stability Control) can improve a vehicle’s stability by detecting and reducing loss of traction (skidding). When ESP detects a loss of steering control, please check the ESP light and get a code reading before you do anything about it. It can help you minimize potential losses, both monetary and human life.
8. Battery System
The battery light (in the shape of a battery symbol) indicates a battery charging problem. If the battery light comes on and stays on while you are driving, the most common cause is a broken alternator belt. You can use VD500 to read and clear the fault code when the problem is located.
9. Immobilizer System
The immobilizer warning light turns on if your anti-theft system does not recognize the car key being used, or if it’s the wrong key or low on battery. The engine may start and run for a few seconds before dying or the engine may not even crank up at all. VD500 can assist you by reading error codes associated with the above-mentioned symptoms.
10. Retrieves VIN Information
For other OBD2 vehicles:
Reads code Erases code Shows code definitions Retrieves VIN Information Turns off the MIL (check engine light) Notice:Must be 12V cars and light trucks (non-electric) manufactured in 1996 or later that are OBD II-compliant with 16-Pin OBD II protocols (J1850 VPM, J1850PWM, ISO9141, KWP 2000 and CAN).
Scan of All Control Modules:
1. Engine system
2. Auto transmission system
3. ABS brake system
4. Auto HVAC system
5. Center electronic system
6. Airbags system
7. Steering wheel system
8. Instrument system
9. Immobilizer system
10. Navigation system
11. Radio system
12. Diesel pump system
13. Electric drive
14. Battery regular
15. Battery charger
16. Parking brake
17. Steering angle
18. Suspension alert
19. Sound system
20. Chassis control
21. Tire pressure
22.Active Steering
23. Door electric system, drive/pass/rear left/rear right
24.Slide door, right/left
25. Automatic light
26. HAVC Heating, Ventilation and Air Conditioning
27. Air Condition Clutch
