MAGICAR Remote Start Car Alarm M 881 A CANBUS

The MAGICAR M 881 A CAN BUS is a branded article 2-way car alarm with an LCD remote controller, enhanced design and function is available. All imported information about the vehicle is shown on display for better control of the vehicle. This version is without a remote start function.
The Magicar M881 A is the primary car alarm model of the brand MAGICAR, marked as 88x. This car alarm is built on the base of the previous modern and time-proved car alarm Magicar M871A.

This version of the car alarm includes the CAN BUS module, which provides reading and writing data on the CAN BUS of the vehicle. With this module is easy and quick to realize the installation of car alarms into vehicles. The module provides information about doors, trunk, hood, bonnet, ignition, foot brake, and engine running or can send data for locking/unlocking doors, closing windows, opening the trunk, flashing lights or the hooting of klaxon. Moreover, the car alarm is possible to activate or deactivate by the original remote controller of the vehicle. It is necessary to verify support for your vehicle. See the List of Supported Vehicles on our websites.

The set includes an enhanced 2-way remote controller. The display shows information like the status car (lock/unlock), actual active function ( Auto, Passive, Drive Lock, Mute), comfort function (current time, alarm clock, temperature, car battery voltage, remote battery voltage). When the car alarm is triggered, the display shows the cause of the trigger (door, hood, bonnet, shock sensor, additional sensor). Moreover during the alert the remote controller beeping, vibrating and blinking by red light.
The remote controller is designed in black/blue/silver colours.

Additional new features of remote controllers for Magicar M881A:

• during normal operations, the backlight is blue light
• during alert backlight is changed from blue to red light
• setting function AUTO is now simplified
• information about the remote learning process (when new remote controllers are added to the car alarm) is shown as ID LEARN text on display.
• when the remote starts running and the remote time function is chosen, the display shows START AGAIN text
•  enhanced RF communication between the main unit and the remote controller

CAN BUS

• support for 1 way connection
• support for 2 way connection
• Read and write data

Remote controller:

• set includes 1 pcs 2-way remote controller with 4 buttons
• max. 3 controllers into the system
• signal from the car alarm is transmitted onto all learned remote controllers
• current time
• alarm clock
• vibration on/off
• temperature
• car battery voltage / remote battery voltage
• battery power save mode
• button lock function
• strength of RF signal
• max. range around 2000 meters

Sensors:

• two zone shock sensor (into set)
• one zone additional sensor (as Ultra)
• bypass sensors by remote
• bypass sensor when AUX is activated (optional)

Inputs/Outputs:

• additional one zone sensor input
• door, hood, bonnet input
• start-kill output
• light (NO/COM relay) output / sequential function optional
• two auxiliary outputs with an adjustable pulse length
• trunk open (NO/COM relay) output
• lock/unlock (NC/NO/COM relay ) output (0.8s, 4s, 15s, double pulse)
• parking light input
• foot brake input

Safety features:

• monitoring of open doors
• memory state at power loss, memory alarm
• quiet/loud activation
• rearming
• passive arming
• PANIC function
• dome light delay
• emergency deactivation by PIN code
• valet mode

Comfort features:

• status of the car on the remote display
• flashing when the doors are open
• flashing when the hood is open
• call for vehicle owner – RPS module
• 3-level sensitivity of RPS sensor
• activation/deactivation of a system when approaching/leaving to control the vehicle (AUTO function)
• drive lock (lock by ignition)

Technical parameters:

• type of siren: no back-up /12V/15W
• operational temperature: -40°C — +85°C
• power supply: 12 – 14 V
• type of RF communication: FSK modulation/hopping code
• RF power: 10 mW
• operational frequency: 433,92 MHz