Victron Energy 12V 250W Pure Sine Wave Inverter Converts 12 volt

PIN121251400

Pure Sine

Victron Phoenix Inverer 12V/250W 230V

The Phoenix 12/250 VE. Direct inverter lets you power domestic equipment that requires 230V using leisure or automotive batteries rated at 12V, 24V, or 48V DC.

 

**VE .Direct Communication Port**

The VE .Direct port can connect to:

– A computer (requires a VE.Direct to USB interface cable)

– Apple and Android smartphones, tablets, MacBooks, and other devices (requires a VE.Direct Bluetooth Smart dongle)

 

**Fully Configurable Settings:**

– Low battery voltage alarm trip and reset levels

– Low battery voltage cut-off and restart levels

– Dynamic cut-off: load-dependent cut-off level

– Output voltage range: 210 – 245V

– Frequency: 50 Hz or 60 Hz

– ECO mode on/off and ECO mode sense level

 

**Monitoring Features:**

– Input and output voltage

– Percentage of load

– Alarm indicators

 

**Proven Reliability:**

The inverter features a full bridge with toroidal transformer topology, demonstrating reliability over many years. It is also short-circuit proof and protected against overheating, whether caused by overload or high ambient temperatures.

 

**High Start-Up Power:**

This inverter can start loads such as power converters for LED lamps, halogen lamps, or electric tools.

 

**ECO Mode:**

When in ECO mode, the inverter will switch to standby when the load falls below a preset value (minimum load: 15W). In standby mode, the inverter will periodically switch on briefly (adjustable, default: every 2.5 seconds). The inverter will remain powered on if the load exceeds a preset level.

 

**Remote On/Off Functionality:**

A remote on/off switch can be connected to a two-pole connector or placed between the battery positive terminal and the left-hand contact of the two-pole connector.

 

**LED Diagnosis:**

Please refer to the manual for detailed diagnosis instructions.

 

**Automatic Transfer Switch:**

We recommend using our Filax Automatic Transfer Switch for low-power inverters to transfer the load to another AC source. The Filax features a short switchover time of less than 20 milliseconds, ensuring that computers and other electronic equipment continue operating smoothly without disruption.