Showing 1609–1632 of 2348 resultsSorted by latest
-
MSG
MSG MS604 – TEST BENCH FOR HYDRAULIC POWER STEERING PUMPS
MSG MS604 – TEST BENCH FOR HYDRAULIC POWER STEERING PUMPS
MSG MS604 Test Bench is used for evaluation of the technical condition and output characteristics of mechanically driven single- and double-circuit pumps. The bench simulates the operation of the tested unit in a car.
SKU: n/a -
MSG
MSG MS603N – 220V – TEST BENCH FOR DIAGNOSTICS AND FLUSHING OF POWER STEERING SYSTEMS
MSG MS603N – 220V – TEST BENCH FOR DIAGNOSTICS AND FLUSHING OF POWER STEERING SYSTEMS
MSG MS603N-220V is a universal test bench for power steering systems operated from 220V mains. The test bench for system flushing and evaluation of the technical condition of a power steering rack or pump.
SKU: n/a -
MSG
MSG MS570 – ELECTRONICS REPAIR SPECIALIST TABLE
MSG MS570 – ELECTRONICS REPAIR SPECIALIST TABLE
MS570 – Table for electrical repair specialists for the quality workplace. Adapted to work with diagnostic equipment for repair of EPS – MS561 controller. It has two built-in laboratory power supplies, a place for an oscilloscope and a soldering station. Equipped with LED lamp with a total output of 60 watts.
SKU: n/a -
-
MSG
MSG MS550 – ADAPTER FOR DIAGNOSTICS OF STEERING RACKS WITHOUT CONTROL UNITS
MSG MS550 – ADAPTER FOR DIAGNOSTICS OF STEERING RACKS WITHOUT CONTROL UNITS
MSG MS550 adapter is used jointly with the MS561 controller for diagnostics of electric power steering racks without the electronic control unit (usually in Japanese cars).
SKU: n/a -
MSG
MSG MS522 – PNEUMATIC VICE
MSG MS522 – PNEUMATIC VICE
MSG MS522 – PNEUMATIC VICE, designed for fast fixing of cylindrical objects with a diameter of 35 to 85 mm with a clamping force of up to 1400 Newtons. The vice is controlled by means of a pneumatic distributor. Working pressure from 6 to 10 bar.
SKU: n/a -
MSG
MSG MS521 – MECHANISM FOR TESTING HPS RACKS UNDER LOAD
MSG MS521 – MECHANISM FOR TESTING HPS RACKS UNDER LOAD
The mechanism has been designed for diagnostics of steering racks under pressure and should be used simultaneously with the MS502M test bench. The equipment allows detecting the leak, hydraulic shock, bodywear, sticking of a pressure relief valve
SKU: n/a -
MSG
MSG MS300 – TEST BENCH FOR DIAGNOSTICS OF BRAKE CALIPERS
MSG MS300 – TEST BENCH FOR DIAGNOSTICS OF BRAKE CALIPERS
MSG MS300 Test bench is intended for diagnostics and repair of brake callipers. It enables us to assess the unit’s performance and check its air-tightness. The bench can also diagnose electromechanical parking brakes.
SKU: n/a -
MSG
MSG MS200 – SHOCK ABSORBER FILLING SYSTEM
MSG MS200 – SHOCK ABSORBER FILLING SYSTEM
MSG MS200 – SHOCK ABSORBER FILLING SYSTEM is used for filling mono-tube and twin-tube shock absorbers with gas after repair. MS200 has a pressure adjustment function and is used for shock absorbers of power pressure up to 120 bar.
SKU: n/a -
MSG
MSG MS122 – ADAPTER FOR CONNECTING COMPRESSORS WITH 24V CLUTCH TO MS111 TEST BENCH
MSG MS122 – ADAPTER FOR CONNECTING COMPRESSORS WITH 24V CLUTCH TO MS111 TEST BENCH
MSG MS122 – ADAPTER FOR MS111 BENCH enables to check compressors with 24V clutch and to diagnose the clutch failures in a correct way.
SKU: n/a -
-
MSG
MSG MS111 – TEST BENCH FOR COMPRESSORS OF VEHICLE AIR CONDITIONERS
MSG MS111 – TEST BENCH FOR COMPRESSORS OF VEHICLE AIR CONDITIONERS
MSG MS111 is intended for health assessment of vehicle climate system compressors operating either on R134a or R1234yf refrigerants, post-maintenance run of compressors, pre-sale testing of new analogues and test report.
SKU: n/a -
MSG
MSG MS101P – PNEUMATIC FLUSHING STAND FOR AIR CONDITIONERS
MSG MS101P – PNEUMATIC FLUSHING STAND FOR AIR CONDITIONERS
MSG MS101P – PNEUMATIC FLUSHING STAND FOR AIR CONDITIONERS is a piece of specialized equipment for quality cleaning of AC system pipelines and components from contaminating particles and old oil.
SKU: n/a -
MSG
MSG MS1000+ – TEST BENCH FOR SHOCK ABSORBERS
MSG MS1000+ – TEST BENCH FOR SHOCK ABSORBERS
MSG MS1000+Test bench is intended for the health assessment of all shock absorber types used in passenger cars and repair determination. Also, it can be used to perform a post-maintenance evaluation and check whether a shock absorber performance corresponds to its technical characteristics.
SKU: n/a -
MSG
MSG MS0311 – STARTER SOLENOID CLAMP
MSG MS0311 – STARTER SOLENOID CLAMP
MSG MS0311 – STARTER SOLENOID CLAMP is designed to be used with an MS031 tester to check starter solenoids. The design is made in such a way that would provide maximum convenience in operation. It allows you to firmly fix the solenoid starter of any performance, the diameter and length do not matter. A limiter is also provided to avoid the departure of the solenoid striker during testing.
SKU: n/a -
-
MSG
MSG MS021 – TESTER FOR DIODES & RЕCTIFIERS
MSG MS021 – TESTER FOR DIODES & RЕCTIFIERS
MSG MS021 Tester enables to evaluation technical condition of a rectifier in the automotive alternator, as well as of diodes separately. The device is user-friendly, light-weighted and has small dimensions. It has been designed to meet the requirements of auto service stations.
SKU: n/a -
MSG
MSG MS016 – TESTER FOR VOLTAGE REGULATORS OF ALTERNATORS
MSG MS016 – TESTER FOR VOLTAGE REGULATORS OF ALTERNATORS
MSG MS016 Tester is a compact multifunctional device for express diagnostics of automotive 12/24V alternators, reversible 12V alternators of Stop-Start system, starters without removing them from a car, and voltage regulators separately from alternators. The device reads and saves the data transmitted via the LIN bus of a vehicle.
SKU: n/a -
MSG
MSG MS015 COM – TESTER / ADAPTER FOR DIAGNOSTICS OF VOLTAGE REGULATOR
MSG MS015 COM – TESTER / ADAPTER FOR DIAGNOSTICS OF VOLTAGE REGULATOR
MSG MS015 COM Tester is a simple and user-friendly device for express diagnostics of 12V automotive alternators with digital or PWM-controlled voltage regulators without removing them from the cars. The tester is intended for both small and big car repair shops.
SKU: n/a -
MSG
MSG MS014 – TESTER FOR STATOR WINDINGS AND RECTIFIERS
MSG MS014 – TESTER FOR STATOR WINDINGS AND RECTIFIERS
MSG MS014 Tester is used to check stator windings and rectifiers of automotive alternators. With this Tester, neither other measuring tools nor unsoldering and removing of some particular semiconductors are required.
SKU: n/a -
-
MSG
MSG MS012 COM – TESTER FOR VOLTAGE REGULATORS
MSG MS012 COM – TESTER FOR VOLTAGE REGULATORS
MSG MS012 COM Tester simulates a faultless alternator to which a voltage regulator is connected to evaluate its performance and to select an appropriate analogue voltage regulator for this particular alternator.
SKU: n/a
