DURITE 24V 1500W Pure Sine Power Converter DC to 230V AC Sine Wave Voltage Inverter – 1500W
1500W Sine wave inverter input 22 – 30VDC to 230 VAC 50Hz output, rated at 1500W continuous power output.
- Supplied with a remote control.
- LCD with fault code reader/diagnostics.
- 3000W peak.
- Fast-charging 2 x 2.1A USB output.
- Supplied with 2 x standard 3-pin BS1363 UK sockets outlet, ON/OFF switch controlled.
- Fan cooled.
- E Marked R10 EMC approved.
Specifications
DC Input Voltage
26VDC (22VDC-30VDC)
AC Output Voltage
230VAC +/- 10%
Output Frequency
50Hz +/-1Hz
Output Wave
Pure Sine Wave
Efficiency
85 Percent Maximum.
24V input no load current draw
≦ 0.7A
USB Output (2 USB total)
DC 5V, Maximum 2100mA, 2.1A
Continuous Output Power
1500 watts
Surge/Peak Output Power
3000 watts
Output Sockets
2 x standard 3-pin BS1363 UK socket outlets
Protection
Overload, over-temperature, low battery and short circuit.
Input Low-voltage Alarm
DC 21V +/- to 0.4V
Input Low-voltage Shut Down
DC 19V +/- to 0.4V
Low-voltage Recovery Voltage
When the input voltage rises to 24V +/- 0.4V, the inverter will automatically resume operation
Input Over-voltage Shut Down
DC 32V +/- to 0.4V
Over-voltage Recovery Voltage
When the input voltage drops to 28V +/- 0.4V, the inverter will automatically resume operation.
Over-temperature protection
When the temperature inside the inverter decreases to the set point, the inverter will back to work automatically
Over-load Protection
Yes (1550 to 1800W).
Overload Recovery
Reduce the load in the rated power range.
Restart inverter recovery work.
Or wait 1-3 minutes for the inverter to recover automatically.
Restart inverter recovery work.
Or wait 1-3 minutes for the inverter to recover automatically.
Over Temperature Protection
Yes
Over Temperature Recovery
When the temperature inside the inverter decreases to the set point, the inverter will back to work automatically.
Output Short Circuit Protection
Yes
Short Circuit Recovery
After troubleshooting, restart the inverter by manual to resume work
Reverse Protection
A reverse connection will blow the fuse, and a fuse replacement with the same specifications can fix the inverter; Reverse connection will cause irreparable damage to the inverter!.
The Best Working Temperature
5 – 35° C
Fuse
25A*4.
Cooling Method
By fan
LCD Display Information
Input Voltage, Load Power, Output Frequency, Output Current, Battery Power and Fault Code;
F01 : Low volt
F02 : Overvolt
F03 : Overload
F04 : Over temperature
F05 : Output short circuit
F01 : Low volt
F02 : Overvolt
F03 : Overload
F04 : Over temperature
F05 : Output short circuit
Remote Control
RJ12 port, 6m cable.
Dimensions
Length 374mm, Width 210mm and Height 101mm
Certification
E-marked, EMC and R10 approved.
Weight
4.5kg