Keetec M CAN is an universal CAN bus interface designed for reading and writing data to CAN bus to vehicles with 12/24V power supply.

• 10 programmable wire inputs make it much easier to install additional devices such as car alarms, parking sensors, audio system or taximeter
• Function for START/STOP deactivation
• more functions for reading information from CAN bus.
• simple programming via Keetec Software, direct updating using the Micro USB connector (no additional programming equipment required)
• optionally you can add module RF SMART 4P to control the vehicle central locking by writing information to CAN bus or calibrating taximeter values

M CAN can be set up for a particular vehicle model. The vehicle database can be found in the list of supported vehicles

Outputs of M CAN module:

• foot brake
•  handbrake
•  clutch pedal
• parking lights
• low beam lights
• high beam lights
• Door contacts
• Contact bonnet
• Contact boot
• Ignition
• Lock original remote control from the vehicle
• Unlock original remote control from the vehicle
• Engine speed (output is active above 500 rev / min or programmable *)
• Vehicle speed (the output is active at up to 10 km / h or pulse)

* Programmable output engine speed

Inputs of M CAN module:

• Lock vehicle
• Unlock vehicle
• Unlock driver’s door
• Roll-down windows
• Roll-up windows
• Trunk open
• Hazard lights