ANCEL V6 Car Diagnostic Scanner Tool OBD2 Code Reader

 

ANCEL V6 Full System Car Diagnostic Tools:

1. Support system-wide error code reading and clearing
2. 15 main special functions to help you solve most car problems
3. 8000mAh super-capacity battery, which can meet your use time of almost a day
4.11 Multi-language, better let you use this flatbed scanner
5. Android System, with its touch screen, making it more convenient for you to use
6. Lifetime Free Update: you only need to purchase once, and you can use and update for life
7.2GB RAM + 32GB ROM, diagnosis and code reading are smoother
8.New Version
9. Support More than 10000+ Car Models

 

ANCEL V6 Automotive Scanner Full System Read Codes

Ancel V6’s 10-inch tablet OBD2 scanner is capable of reading and clearing trouble codes for all major systems, including Engine, Airbag/SRS, Transmission, ABS, SAS, Air Conditioning, ACC, Audio, Headlight, Center Lock, ESP,Suspension failures, etc.

To diagnose the Brake System if you feel the brake pedal is mushy and notice unusual odour or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;

To diagnose the Emission System if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;

To diagnose the fuel system, check if the vehicle won’t start or if the “Check Engine” light is illuminated. Check the car’s fuel system regularly to ensure the best performance of your car with the lowest emissions;

To diagnose transmission, check if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your vehicle;

To diagnose the Wiper System if you observe a chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;

To diagnose Light System if you see rapid signal blinking or dimming lights.

 Special Reset Service Functions

Comprehensive automotive scan tools with multiple reset functions have become a market trend. Other diagnostic tools that cost about the same typically include only a few or 10+ service reset functions, are limited in their capabilities and are expensive.  It is the most cost-effective diagnostic scanner on the market. Here are some of the most popular services:

1. Oil Reset: When the service lamp on the instrument cluster is up, change the oil, turn off the oil light and reset the service mileage.

2. ABS Bleeding: When the ABS contains air, the ABS bleeding function is required to bleed the brake system to get a firm brake pad.

3. EPB Reset: It maintains electronic parking brake systems. The brake pad reset is required to turn the MIL off after replacing the brake pad.

4. IMMO Keys function (All Keys Lost, Add Key, Reset Key): It supports adding the new key and remotely disabling the lost one when the key is lost to prevent your car from being stolen.

5. BMS Reset: When the battery shows ageing or damaged, you need to rematch and register it, then clear the fault codes from the dashboard and reset the BMS module.

6. D.P.F. Regeneration: The diesel filter will become clogged after a long time. Once the engine recognizes the D.P.F. clogging, it will trigger regeneration. This function cleans diesel filters to clear the blockage and reset the D.P.F. light.

7. Injector Coding: Write the new injector code to the ECU after the injector is replaced so that the cylinder can identify the new injectors and lower fuel emissions.

8. SAS Calibration: The steering angle sensor detects the steering wheel’s rotation angle. This function calibrates the steering angle sensor to clear fault memories of the steering angle sensor.

9. Throttle Adaptation: After clearing or repairing the electronic throttle, re-learning and adapting the throttle sensor position is necessary to adjust the throttle opening precisely.

10. TPMS Reset: The tyre pressure monitoring system can perform real-time automatic monitoring of various tyre conditions. When the tyre pressure is insufficient, it needs to be reset after the tyre or sensors are replaced.

11. AT Set/Gearbox Matching: Complete the gearbox’s self-learning and improve the shifting quality. After the gearbox is disassembled or repaired, it will cause problems such as shift delay. This function must be executed to make the gearbox automatically compensate according to the driving conditions to achieve a more ideal shift quality.

12. Gear Learning: If the engine ECU, crankshaft position sensor, or crankshaft flywheel needs to be replaced or shows the fault code “tooth not learned,” tooth learning must be performed.

13. Suspension Calibration: This function can adjust the vehicle’s height. The following situations need to perform this function to adjust the vehicle height sensor for calibration: 1. After replacing the vehicle height sensor or control module in the air suspension system. 2. When the level of the car is wrong.

13. Headlight Reset

14.Suspension

15.Sunroof

Note: The above list only includes a small portion of all supported services; many more are not listed. Also, not all services and special features are universally compatible. Please send us the VIN and the functions you need to check compatibility.

 

* Other Functions： One-click screenshot, record video, camera (5.0 megapixel, autofocus, with a flashlight), one-touch update, remote diagnostic, quick support, vehicle software, testing report, data stream record & playback & print, diagnostic feedback, and more other valuable additional functions will bring you the ultimate experience.

*OE-Level Full OBD2 Modes Diagnostic Functions： This enhanced scan tool supports all OBD2 test modes for 12V vehicles, including reading and clearing fault codes(DTCs) on all systems, reading the Freeze frame, showing live data steam of multiple sensors in graph and text, O2 monitor test, etc.

 

Support 11 Multi-language

English， French， Spanish， German， Russian， Korean， Japanese， Portuguese， Italian， Polish， Dutch